FIRE CABLE
FireQing - Multicore Cable suitable for Fire Alarm & Emergency Lighting installations.
DESCRIPTION:
Specification
Solid TCW, Silicone Rubber Insulated, Close Weave Glass Tape Covered, Solid TCW Earth, Aluminium Laminate Tape, Thermoplastic Zero Halogen Low Smoke Compound Sheath. Rated:300/500V
Available in- 2, 3, 4Core + Earth
- 1.00mm, 1.5mm, 2.5mm, 4.00mm
- Red or White
- P Clips to suit (in packs of 100)
- Glands to suit (in packs of 10)
Approvals
Approvals: BS7629 Pt1, BS5839:1 (PH30)
Flame propagation: BS4066 Pt1, IEC332 Pt1
- Resistance to Fire (3hours @ 750 C): IEC331
- Resistance to Fire (3 Hours @ 950 C): BS6387 Category C
- Resistance to Fire & Water (15 Minutes @ 650 C): BS6387 Category W
- Resistance to Fire with Mechanical Shock (15 Minutes @950 C): BS6387 Category Z
Acid Gas Emmisions: IEC60754-2, BS6425 Pt2
DESCRIPTION:
FQ59 - 75 Ohm Coaxial Cable suitable for CCTV/Fire Alarm installations.
Specification
1/0.60 Bare Copper Conductor, HDPE Iner Insulation (Ø 2.00mm), Silicone Rubber 2nd Insulation (Ø 4.50mm), Close Weave Glass Tape, Bare Copper Wire Braid (94% Coverage), LSZH Sheath (RED) Ø 8.15mm
The circuit integrity of high frequency systems such as closed circuit television (CCTV) must be maintained for as long as possible in an emergency.
The Principal compound used on the FQ59 coaxial is low smoke zero halogen, and therefore ideal in high risk and populated commercial buildings.
FQ125 also available
